vLight

Volcon Solutions > vLight

vLight

Area-light

https://volconsolutions.com/wp-content/uploads/2023/06/3M8A7702-scaled.jpg
Our area light is developed to attain and hold maximized brightness with a very low warm-up period. It maintains a consistent color temperature with precision and a long hour’s life with cost-efficient and effective integrated solutions integrated well within the light for maximum outputs. Easy-to-mount and easy-to-use area light designed and developed by Volcon technicians ensures a wider distribution of light sources enabling better productivity and value addition in the production and installment spectrum of industries.

Product specifications

  • Supply Voltage:24 VDC
  • Construction:Housing: Aluminium Acrylic Window
  • Operating Temp:-20 °C to 70 °C (-4 °F to 158 °F)
  • Power Consumption:12 Watt
  • Light Intensity:6500K Natural White

Ordering Information

  • Model No: LT24BW
  • Cable: M8 3 Pin Female Straight Connector

Backlight

https://volconsolutions.com/wp-content/uploads/2023/06/3M8A7702-scaled.jpg
Our customized backlights are built for maximized outputs with controllable intensity, industry-standardized certifications, convenient mounting, and a built-in driver. Our backlight series comes with a customizable operation handling, wherein it can run on continuous operation mode or can operate either on an NPN or PNP trigger signal. Running on an industry-standard 24VDC, the 1-10 VDC procures for the user total control over the intensity of the backlight, while proper heat dissipation is achieved through side extrusion and heat sink installed already into the light. The backlight comes with an in-built driver, with a total of 45 mm extrusion the light is very easy to mount.

Product specifications

  • Electrical Input:24V DC +/–5%
  • On/Off Input:PNP: +4V DC or greater to activate | NPN: GND (
  • PNP Line:4 mA @ 4V DC | 10 mA @ 12V DC | 20 mA @ 24V DC
  • NPN Line:15 mA @ ground (0V DC)
  • Analog Intensity:The output is adjustable from 10–100% of brightness by a 1–10V DC signal.Connection:5-pin M12 connector
  • Ambient Temperature:-18º–40º C (0º–104º F)
  • Compliances:CE, RoHS, IEC 62471

 

Standard Light Sizes Input Current (Peak) Input Power (Peak) Weight
150 mm x 150 mm 1.1 A 26.4 W ~3.08 kg
300 mm x 150 mm 2.2 A 52.8 W ~4.80 kg
300 mm x 300 mm 4.4 A 106 W

Dome light

https://volconsolutions.com/wp-content/uploads/2023/06/3M8A7702-scaled.jpg
Volcon dome light is developed with a 140mm wide area viewing adds convenience and enables reading barcodes, imperfections, scrutiny of product labels, round products, highly reflective products, and inspection of products for even, uniform, and repeatable light intensity. A compact design made to simplify and integrate functionality in the inspection and reading product process management. The key features of our dome light include multi-drive operation, allowing the user to function in continuous light or strobe mode. The NPN and PNP trigger signal input and an in-built 1-10VDC analog allows the user to control light intensity, making it customizable to the direct requirement on hand. Maximum outputs with versatile capabilities of our Dome light with an industry-standard 5-pin M12 connector make it easy to install and operate for all.

Product specifications

Continous Operation Strobe Mode
Electrical Input 24VDC +/-5% 24VDC +/-5%
Input Current Max. 1 A Max. 4.1 A
Wattage Max. 24 W Max. 98 W
PNP Line 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC
NPN Line 15 mA @ ground (0VDC)
On/Off Input PNP: +4VDC or greater to activate
                                                       NPN: GND (<1VDC) to activate
Connection 5-pin M12 connector
Ambient Temperature -18º–50º C (0º–122º F)
Compliances CE, RoHS, IEC 62471

 

Special features of Strobe

  • Strobe Mode:Connect pin 5 to GND
  • Strobe Duration:Min. 10 µs | Max. 50 ms
  • Duty Cycle:Max. 10%
  • Strobe Input:PNP: +4VDC or greater to activate,NPN: GND (<1VDC) to activate

Ring light

https://volconsolutions.com/wp-content/uploads/2023/06/3M8A7702-scaled.jpg

Ring light by Volcon is developed with a multi-driver integrated system, with options of continuous and strobe levels, the ring light is developed with aluminum housing and comes with a low-angle ring light for dark field applications. NPN or PNP triggers can be utilized for light control by the end-user depending upon the driver strobe selected and with an additional 1-10 VDC analog intensity line installed in the ring light, the end user can also control the intensity of the light and the direction for maximum operational convenience. The multi-functional ring light comes with two illumination options dark field and radical either can be chosen for better and optimum results. The easy-to-mount convenience enabling ring light designed by Volcon is developed keeping in mind the requirements of today’s continuous and rigorous operational cycles.

Product specifications

Continuous Operation Operation
Electrical Input 24 VDC +/- 5%
Input Current Max. 510 mA Peak 4.5 A
Input Power Max. 12.5 W Peak 108 W
PNP Trigger 2.8 mA @ 4 VDC | 8.8 mA @ 12 VDC | 17.6 mA @ 24VDC
NPN Trigger 14.4 mA @ Common (0VDC)
Strobe Duration Min. 30 µs | Max. ∞ Min. 30 µs | Max. 50 ms
Strobe Trigger Latency 10 µs 6 µs
Operating Temperature -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity
Storage Temperature -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity
Compliances CE, IEC-62471, RoHS